how to order: website: www .marl.co.uk ? email: sales@marl.co.uk ? ? t elephone +44 (0)1229 582430 ? fax: +44 (0)1229 585155 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. marl international reserve the right to alter without notice the specification or any conditions of supply for product s or service. samples a v ailable ? marl interna tional l td 2007 : ds 014/07 issue 1 page 1 of 2 l black anodised aluminium housing l sealed to ip67 l bi-polar product fitted with a bridge rectifier for true ac/dc operation l large led indication l s pecially designed mounting kit to allow 32mm mounting professional led indica t ors ?25.4mm mounting ordering information & t ypical t echnical characteristics (t a = 25c) mean t ime between failure = 100,000 hours. luminous intensity figures refer to the unmodified discrete led. fea tures specifica tion 672 series p ack quantity = 1 piece p ar t number colour lens vol t age current luminous w a ve opera ting st orage ac/dc dc (ma) intensity length temp temp v opr lopr lv@20ma (mcd) l p (nm) t opr t stg 672-290-99 red colour dif fused 1 10 17 100 627 -40 ~ +85^ -40 ~ +85 y es units v ac/dc ma mcd nm c c high intensity other volt ages ac/dc available. please cont act our t echnical sales. ^ = product s must be derated according to the derating information. each derating graph refers to specific leds. 290
page 2 of 2 bs en iso 9001:2000 approved manufacturer website: www .marl.co.uk ? email: sales@marl.co.uk ? ? t elephone +44 (0)1229 582430 ? fax: +44 (0)1229 585155 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. marl international reserve the right to alter without notice the specification or any conditions of supply for product s or service. ? marl interna tional l td 2007 : ds 014/07 issue 1 672 series ma terials mounting kit body black anodised aluminium nut aluminium panel seal neoprene t ermination t ags t in plated brass lens epoxy encap sulation pc5430 resin lock w asher s pring w asher part number: 949-000-0032mm mounting kit and washer which increases the overall mounting diameter of either 671 or 672 series. technical characteristics push-on connect ors series maximum p anel nut minimum min/max. power cut out mounting mounting p anel dissip a tion t orque centres thickness 672 2500 25.4 1.2 x,y = 41.0 2.0-10.0 units mw vdc mm nm mm anode termination indicated by colour dot.mounting hole to be clean and burr free. dimensions in mm (t ypical) not to scale mounting hole 926-000-00 is brass tin plated,vinyl insulation. for use with 672 series lamp s. dimensions in mm (t ypical) not to scale
|
